Hex GS-911 for BMW Motorcycles
_________________________________________________________________________________________________
_________________________________________________________________________________________________
© Hex Innovate 2021-2022 Page 25 of 38 GS-911 2207.2
4. Click the link for the correct motorcycle model.
The software controller selection screen will be shown.
To read software values for the chosen controller, read current software
values as a real-time graph, and read and clear stored fault codes, see
Emergency functionality.
To diagnose and repair problems using the GS-911 Service functions, see
Service functionality.
9.5 Listing the motorcycle’s electronic modules
Modern motorcycles rely on a collection of electronic control systems to
operate. The newer the motorcycle, the more electronic control systems it
is likely to have.
To view a list of the electronic control modules installed on the motorcycle,
do the steps that follow:
1. Click Detected Vehicle or Select Vehicle.
2. Click Scan Controllers.
A list of all electronic control modules installed on the
motorcycle will be shown. As an example, the view below
lists the modules fitted to a typical R1200GS Adventure
(K25).
3. To re-scan the list of installed modules, click Rescan.
4. The controls for printing, downloading and E-mailing the list of
installed modules are the same as those used for AutoScan
reports. To print, download or E-mail a list of the installed modules,
refer to AutoScanning.
9.6 Upgrading to a Professional software licence
If you have an Enthusiast software licence, the GS-911’s Service
functionality can be used on a maximum of ten motorcycles.
To Next Page
Loading...