HEX GS-911 - Emergency Functionality

To Next Page

To Previous Page

Hex GS-911 for BMW Motorcycles

_________________________________________________________________________________________________

To allow GS-911 to be used with more than 10 different motorcycles, you

need a Professional software licence. This lets you use the GS-911

Service functionality on an unlimited number of motorcycles.

To upgrade to a Professional software licence, click Setup  VIN Usage

 Upgrade to Pro.

9.7 Emergency functionality

Emergency functionality is functionality whose main purpose is to help you

diagnose and repair a faulty motorcycle when:

 The fault could potentially make the motorcycle unrideable, but:

 It may be possible to correct the fault using basic knowledge and

tools, or when advanced knowledge and tools may not be

immediately available.

Use Emergency functionality by doing the steps that follow:

1. Specify the motorcycle series and model as shown in Selecting a

motorcycle series and model.

2. Click the link for the electronic module you want to work on.

 The relevant Function menu will be shown.

3. Continue with fault-finding by choosing one of the following

actions:

 To read the module’s hardware and software metadata,

click ECU Information.

 To read the module’s stored fault codes, see Reading all

current fault codes for a chosen module.

 To clear the module’s stored fault codes, see Clearing

current fault codes.

 To read the motorcycle’s real-time operating parameters as

a list, see Reading software values from a chosen module

in real time.

 To read the motorcycle’s real-time operating parameters as

a dynamic 2-D graph, see Reading software values from a

chosen module in real time.

To manipulate the components that are controlled by the chosen module,

see Service functionality.

IMPORTANT

For up-to-date information on supported diagnostic

functions for each motorcycle model, go to

http://www.hexcode.co.za/products/gs-911/function-chart.