HEX GS-911 - Operating GS-911 with a Mobile Phone or Tablet; Prerequisites for Mobile Control Devices; Using GS-911 Software for Mobile Control Devices

To Next Page

To Previous Page

Hex GS-911 for BMW Motorcycles

_________________________________________________________________________________________________

6 OPERATING GS-911 WITH A MOBILE PHONE OR TABLET

Different mobile versions of the GS-911 software are available. This

allows you to operate your GS-911 with a wide variety of mobile phones.

Some tablet computers can also use mobile versions of the GS-911

software.

GS-911 software and support are available for Android-equipped phones

and tablets, and Apple iPhones and iPads running iOS.

Please note that official support and software updates are no longer

available for non-Wi-Fi mobile control devices.

6.1 Prerequisites for mobile control devices

If you are using a mobile control device to control GS-911, the device

must have Wi-Fi capability and a current web browser that is compatible

with HTML5, such as Chrome, Firefox or Safari.

GS-911 software is available for mobile control devices using the following

operating systems:

 Android devices: Android OS version 2.3 or later.

 Apple iPhones and iPads: Any version of the iOS operating

system.

6.2 Using GS-911 software for mobile control devices

To install the correct GS-911 software for your mobile control device, refer

to https://www.hexgs911.com/software-downloads/. After following the

online instructions, launch the software from the mobile control device by

doing the steps that follow:

1. Connect the GS-911 to the motorcycle's diagnostic connector as

shown in Connecting GS-911 to a motorcycle.

TIP

If a Wi-Fi network with internet connectivity is available, you

can access full Service functionality on mobile control

devices by using the GS-911 Cloud feature. For details,

refer to Service functionality and mobile control devices.

IMPORTANT

If a Wi-Fi network with internet connectivity is available, you

can access full Service functionality on mobile control

devices by using the GS-911 Cloud feature. For details,

refer to Service functionality and mobile control devices.