Hex GS-911 for BMW Motorcycles
_________________________________________________________________________________________________
_________________________________________________________________________________________________
© Hex Innovate 2021-2022 Page 5 of 38 GS-911 2207.2
3 REGISTERING YOUR GS-911
Before a new GS-911 can communicate with a BMW motorcycle, it must
be registered.
Registration activates the GS-911 device and enables support and
warranty cover. The registration process is also used to enter the new
owner’s details if you ever decide to sell your GS-911.
When you take ownership of a GS-911, register it as shown in the
Register your GS-911wifi video at https://www.hexgs911.com/videos/.
IMPORTANT
To register, you must do any one of the following:
Connect the GS-911 to the internet in Infrastructure
mode.
Use the supplied USB cable to connect the GS-911
to a computer with internet access.
If you do not do the registration procedure as shown in the
video below, the GS-911 will be blocked from
communicating with control devices.
To Next Page
Loading...