Electrical components and controller [option]
• Check that these are in good condition.
• Make sure that the horn works correctly (only if the controller is installed).
Hydraulic system and oil level in the tank
• Check that there are no leaks from the hydraulic hoses,
lines and connections.
• Make sure that all security seal wires (Ex. LHV, dump
valves, etc...) are not broken. Always go to/contact an
authorised service workshop when the seal wire has
been broken.
• Check oil level in the tank. If necessary, fill to correct
level.
NOTE
Always place the vehicle on level ground
with the crane in transport position while
checking the oil.
Maintenance and Service
EFFER 35 77
To Next Page
Loading...
