October 2013 Page 79
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Step Procedure
3
Creating a Fluorescent Image: In a separate drawing program, create the image that
you wish to fluoresce.
4
Create the IMAGE in the actual size that you want it to appear on the card, and save it as
a Grayscale or 1 - bit bmp file on the root c:\ directory.
•
Do not put spaces in the file name.
5
Create a new text box in your badge application, and type ~I followed by the address of
your image (see Display A below). The top left of your image will start at the top left of
6
Set up the printer driver preferences. Refer to Step 8-9 below.
7
Printer will print the fluorescent BMP IMAGE at the ~I position on the card. Printer will
print the fluorescent TEXT at the ~T position on the card.
BMP Image located at c:\globe.bmp
8 Set the Ribbon for YMCFKO in the Printing Preferences.
Note: The Automatically detect the installed Ribbon for every print job button may
To Next Page
Loading...
