Page 80 October 2013
© 2013 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
DTC1250e/DTC1000Me/DTC4250e Card Printer User Guide, PLT-01668, 1.0
Step Procedure
9
Check Invert F-Panel Image to create a negative of the fluorescent image. See below.
• This refers to the ability to cause light or white areas of the image to fluoresce and
dark colors to remain dark on the printed card when exposed to a UV light.
• This was requested because the fluorescent dye color is bright when black light is
applied to it.
By default, the dark areas of the image will fluoresce on the card and the lighter or white
areas will have no dye applied.
Note: This may improve the look of the person’s image if used for the Logo.
To Next Page
Loading...
