Page A-2 HDPii Plus
L000950, Version: 4.0 February 2016
A.2 Cleaning the Magnetic Encoder: HDPii Output Module
1. Open the front cover of the Output Module. Unlock and open the Top cover.
2. Use the Long Alcohol soaked cleaning card. Remove from package. Work quickly as this will dry
out.
3. The Magnetic Head is located underneath the Flipper Table. Start by tilting the Flipper Table so
it is Up & Down. Turn the Flipper Table slightly to the LEFT so the cleaning card is at an angle
and will reach into the magnetic assembly.
To Next Page
Loading...
