February 2016 L000950, Version: 4.0
Page 3-3 Printer Driver Operations
3.1.1 General Card Information
3.1.1.1 Card Design
The printer will print onto any card with a clean, level, and polished PVC surface.
Important: Composite PVC is recommended over straight PVC for the best results and for ISO
card specification compliance. Single side straight PVC does not conform to ISO compliance at
this time.
3.1.1.2 Card Surface
Suitable cards must have a polished PVC surface free of fingerprints, dust, or any other types of
embedded contaminants.
In addition, cards must have a completely smooth, level surface in order for the printer to achieve
consistent color.
3.1.1.3 Card Coverage
Some types of Proximity cards, for example, have an uneven surface which will inhibit consistent
color transfer.
Likewise, some smart card chips are raised slightly above the cards surface, which also results in
poor color transfer.
Orientation
Set the card orientation:
Portrait: Sets the card to print in a vertical orientation.
Landscape: Sets the card to print in a horizontal orientation.
Copies Specifies the number of copies to be printed. Range is 10000 - 1.
Diagnostics
Click Diagnostics to launch the Workbench Printer Utility. See Chapter 7: Workbench Printer
Utility for detailed information.
ToolBox
Select Toolbox to access the Toolbox configuration options. See See Chapter 4: ToolBox for
detailed information.
Test Click Test Print to test the printer.
About Select About to display the Printer Driver information.
OK Closes the window and saves the driver configuration changes.
Cancel Closes the window. Any changes made with the ToolBox, will be lost.
Apply When enabled, applies the recent action selected or completed.
Help Launches Help specific to the active tab.
Field Definition
To Next Page
Loading...
