Chapter 2
February 2016 L000950, Version: 4.0
Setup and Installation Procedures
2.1 Inspection – Card Printer
While unpacking your Printer, inspect the carton to ensure that no damage has occurred during
shipping. Make sure that all supplied accessories are included with your unit.
Reference the Card Printer Quick Start Guide for information on how to load the Print Ribbon,
Transfer InTM Film, Overlaminates and Card stock.
See the Quick Start Guide for connecting the Power to the Printer and Lamination Module.
IMPORTANT: Do not plug in the USB cable until prompted to do so during the installation of the
Printer Driver. Follow the prompts to install the driver.
To Next Page
Loading...
