February 2016 L000950, Version: 4.0
Page 3-25 Printer Driver Operations
3.8 Inhibit Panel Tab
This panel is used with ribbons that have the “I” designation (YMCKI, YMCKIKI and YMCIKH) to define
areas on the surface of the card, where the transfer of InTM Film to the card surface is prevented.
Examples of where this panel has potential use are to ensure signature panels, security holograms or
pre-printed graphics are not covered or obscured by print images or transfer of InTM Film.
Field Description
Displayed information at
the top of window
Displays the current settings.
Inhibit Area
There are six selections to indicate which areas are inhibit areas:
•None
• Defined Area(s)
• Undefined Area(s)
• Omit Smart Chip Area
• Omit Mag Stripe Area
•Omit Signature Area
To Next Page
Loading...
