February 2016 L000950, Version: 4.0
Page 4-3 To o l B ox
4.3 Calibrate Laminator Tab
The Calibrate Laminator tab is active when the laminator is automatically detected or when
the laminator is manually checked as a feature on the Configuration tab.
The Calibrate Laminator option sends the calibrate laminator command to printer. Follow
the instructions on the page for calibration of the lamination sensor.
The lamination module must be warm before sending the calibrate option. If not an error will
occur and will trigger the module to start warm-up. Retry the calibration again after several
minutes
Calibration may also be performed from the printer LCD.
Set Language
If additional languages are available, the user can select the language the printer
will display on the LCD.
Selections are:
•Arabic
• Chinese
• English
•French
•German
•Indonesian
•Italian
• Japanese
•Portuguese
•Spanish
Field Description
To Next Page
Loading...
