Fluorescent Panel Usage Page 8-2
L000950, Version: 4.0 February 2016
8.1 Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using Workbench
1. Verify that the latest version of Workbench is installed.
2. To access Workbench
click on Diagnostics on the Card tab of the printing preferences to
bring up the
FARGO Workbench Printer Utility.
3. Select the printer from the drop-down list.
4. Select Secure Imaging in the Printer Utilities group. Note the message pertaining to the use of
the correct ribbon (Must have a fluorescent panel).
To Next Page
Loading...
