February 2016 L000950, Version: 4.0
Page 3-9 Printer Driver Operations
In the firmware, the values of the installed ribbon and transfer film are updated on initialization
(including each time the cover is closed).
The firmware compares the ribbon and, film values in the PRN file to the values it holds regarding
the currently installed consumables.
If the values do not match, the LCD displays Wrong Ribbon Error or Wrong Film Error and the
driver returns the corresponding error message.
If the values match, a message pertaining to this displays.
Activating the Device Options tab automatically populates the ribbon and film types.
Note: An error message will display if no printer is found when activating the Device Options tab.
Options
Enable Resin Scramble: Only ribbons with the K panel have this option available in the driver.
This eliminates the personal data traceability on used ribbon panels and lowers the risk of
identity theft.
Encrypt Job Data: AES256 encryption protects the data passed from the computer to the
printer.
Use Substitute Panel Data: Only ribbons with the “F” or “I” panel have this option available in
the driver.
When Split 1 Set of Ribbon Panels is selected in the driver AND the Flipper Module is
present:
• The first card layout is printed to the front of the card with the YMC ribbon panel.
• The second layout is printed on the front of the card with the “F” ribbon panel.
• The third layout is printed on the back with the “K” ribbon panel.
When “split mode” is NOT selected AND the Flipper Module is present:
• The card layout is printed to the front of the card with the YMC ribbon panel.
• The second layout is printed on the front of the card with the “F” ribbon panel.
• The third layout is printed on the back of the card with the YMC ribbon panel
• The fourth layout is printed on the back of the card with the “F” ribbon panel.
Print Mode: There are two print modes:
• Normal (default)
• Performance This mode is faster with lower image quality and is suitable for minimal color
with mostly resin text.
HDP5600/600 DPI only
• Normal (default)
• Premium
This mode is faster with lower image quality and is suitable for minimal color with
mostly resin text.
Field Description
To Next Page
Loading...
