HID FARGO HDP5000 User Manual

February 2016 L000950, Version: 4.0
Page iii
9.2.2 Create Bitmap Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
9.2.3 Print Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
9.2.4 Troubleshooting the Inhibit Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5
Chapter 10: Firmware Upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
10.1 Upgrade Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Appendix A: HDPii Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-1
A.1 Accessory Procedures: Using the Security Lock Slot . . . . . . . . . . . . . . . . . . . . . . . A-1
A.2 Cleaning the Magnetic Encoder: HDPii Output Module . . . . . . . . . . . . . . . . . . . . . . A-2

HID FARGO HDP5000 Specifications

General

Resolution	300 dpi
Print Method	Dye sublimation
Card Capacity	100 cards input hopper, 200 cards output hopper
Connectivity	USB 2.0, Ethernet
Card Sizes	CR80 (standard), CR79
Weight	18 lbs (8.16 kg)
Power Requirements	100-240 VAC, 50-60 Hz
Operating Temperature	65° to 80° F (18° to 27° C)
Operating Humidity	20-80% RH
Print Speed	Up to 29 seconds per card / 124 cards per hour (CPH) (YMCK with transfer)