Fluorescent Panel Usage Page 8-8
L000950, Version: 4.0 February 2016
14. Close Workbench.
Note: Any software program file printed with the YMCFK ribbon installed into the printer will
print this design with the F-panel of the ribbon. It will print the same file each time unless a
new template is recreated.
15. Set the ribbon for YMCFK on the Device Options tab of the Printing Preferences window.
Note: The auto detect button may also be used if the F-panel ribbon is currently installed.
16. In this same tab, check Dual Pass if the F-panel should be printed on a separate panel of film
from the YMC image.
Note: It is recommended the default dual pass option be used if the fluorescent image is used
in places where other dye is or any time the invert f panel image option is selected.)
17. Check Invert F-Panel Image to create a negative of the fluorescent image. This may improve
the look of a person’s image.
To Next Page
Loading...
