GigE Line Scan Camera·User Manual
93
11.6 Event Control
The event control function may differ by camera models.
The event control function allows you to enable event notification and view camera events.
When Event Notification is set as Notification On, the camera can generate an event and transmit
a related event message to the computer whenever a specific situation occurs.
Steps:
1. Click Event Control, select specific event in Event Selector.
Figure 11-7 Set Event Control
2. Select Notification On as Event Notification.
3. Right click the connected device in device list, and click Event Monitor.
4. Check Messaging Channel Event. When specific event occurs, the event monitor window
displays time and event content.
Figure 11-8 Event Monitor Window
To Next Page
Loading...
