HikRobot MV-CL021-40GM - Transport Layer Control

GigE Line Scan Camera·User Manual
94
11.7 Transport Layer Control
The specific transport layer control parameters may differ by camera models.
You can go to Transport Layer Control to view the camera’s load size, GEV version, etc.
Table 11-3 Transport Layer Control Description
Parameter
Read/Write
Description
Paylode Size (B)
Read only
It is the camera’s load size.
GEV Version Major
Read only
It is the major version in GEV version.
GEV Version Minor
Read only
It is the minor version in GEV version.
GEV Device Mode Is Big
Endian
Read only
It is the endianness in device’s register.
GEV Device Mode Character Set
Read only
It is the character set in device’s register.
GEV Interface Selector
Read only
It sets which physical network interface to be
controlled.
GEV MAC Address
Read only
It is the MAC address of the network interface.
GEV Supported Option
Selector
Read and
write
It selects the GEV option to interrogate for existing
support.
GEV Supported Option
Read only
It indicates whether the selected GEV option is
supported or not.
GEV Current IP Configuration
LLA
Read only
It indicates whether the Link Local Address IP
configuration scheme is activated on the given
network interface.
GEV Current IP Configuration
DHCP
Read and
write
It indicates whether the DHCP IP configuration
scheme is activated on the given network interface.
GEV Current IP Configuration
Persistent IP
Read and
write
It indicates whether persistent IP configuration
scheme is activated on the given network interface.