HikRobot MV-CL021-40GM - Indicator

GigE Line Scan Camera·User Manual
6
No.
Signal
I/O Signal Source
Description
9
LINE1_P
Line 1+
Differential input/output IO 1+
10
LINE1_N
Line 1-
Differential input/output IO 1-
11
DC_PWR
--
DC power supply positive
12
LINE4_N
Line 4-
Differential input/output IO 4-
3.2 Indicator
The camera indicator is used to display camera status.
Table 3-3 Indicator Description
No.
Indicator Color
Status
Description
1
Red
Flashing very
slowly
Cable connection error occurs.
2
Red
Solid
Major error occurs.
3
Blue
Flashing slowly
The camera is acquiring images under trigger mode.
4
Blue
Flashing rapidly
The camera is acquiring images normally.
5
Blue
Solid
The camera is in idle status.
6
Red and blue
Flash
alternatively
The function of finding me is executed, or the firmware
is updating.
 When the indicator is flashing rapidly, flashing slowly, or flashing very slowly, its unlit interval is
0.2 s, 1 s, 2 s respectively.
 The indicator sometimes may show a purple color when red and blue colors flashing at the
same time.