GigE Line Scan Camera·User Manual
89
The chunk data function may differ by camera models.
The chunk data function is not supported if the camera enables the image compression mode.
The camera uses the chunk data function to realize embedded information in image in priority
if you enable chunk data function and embedded information function both.
Steps:
1. Click Chunk Data Control.
2. Enable Chunk Mode Active.
3. Select specific parameters in Chunk Selector according to actual demands.
4. Enable Chunk Enable.
Figure 11-2 Set Chunk Data Control
11.3 TDI Function
The TDI function may differ by camera models.
When switching TDI Mode, the camera may have short period (3 s to 5 s) of image exception,
which is a normal phenomenon.
To Next Page
Loading...
