GigE Line Scan Camera·User Manual
74
Figure 10-36 Set Hue
10.18 Set Saturation
Saturation is only available for color cameras.
Make sure the camera’s pixel format is not in Mono format.
Only the pixel format is YUV, RGB or BGR, the MV-CL022-40GC camera supports saturation
function.
Adjusting the saturation changes the colorfulness of the colors. A higher saturation makes colors
easier to distinguish.
Steps:
1. Click Color Transformation Control, and enable CCM Enable.
2. Enable Color Transformation Enable.
3. Enable Saturation Enable, and enter Saturation according to actual demands.
To Next Page
Loading...
