GigE Line Scan Camera·User Manual
8
Chapter 5 Camera Connection
Camera connection to the client software is required for the camera’s configuration and remote
operations. This section introduces how to install the client software, set PC and camera network,
connect the camera to the client software, etc.
5.1 Install Client Software
MVS client software is used to connect the camera, set its parameters, etc.
The MVS client software is compatible with 32/64-bit Windows XP/7/10, 32/64-bit Linux, and
64-bit MacOS operating systems. Here we take Windows as an example.
The graphic user interface may differ by different versions of the client software you use.
You can download the MVS client software from https://en.hik robotics.com/.
Steps:
1. Double click the MVS installation package.
2. Select the language.
3. Read and check Terms of the License Agreement.
Figure 5-1 Installation Interface
4. Click Start Setup.
To Next Page
Loading...
