HikRobot MV-CL021-40GM - Transfer Control; Save and Load User Set

GigE Line Scan Camera·User Manual
98
11.8 Transfer Control
You can view the camera’s transfer status in transfer control attribute.
Figure 11-9 Transfer Control Attribute
Table 11-4 Parameter Description
Parameter
Description
Transfer Selector
It selects stream channel.
Transfer Control Selector
It sets control mode, and the camera currently supports
Basic only.
Transfer Queue Max Block Count
It refers to the max. image quantity that the camera
memory can save.
Transfer Queue Current Block Count
It refers to the current saved image quantity in the
camera memory.
Transfer Queue Over Flow Count
It refers to the number of covered images in the camera
memory.
Transfer Queue Mode
It refers to the camera memory queue mode.
11.9 Save and Load User Set
The camera supports 4 sets of parameters, including 1 default set and 3 user sets. The relation
among 4 sets of parameters is shown below.