HikRobot MV-CL021-40GM - Embedded Information in Image

GigE Line Scan Camera·User Manual
86
Parameter
Read/Write
Description
Device Character Set
Read only
It is the character set used in register.
Device Reset
Read and
write
Click Execute to reset the device.
Device Temperature
Selector
Read and
write
It selects device component to view temperature.
Sensor supported only.
Device Temperature
Read only
It is the selected device component temperature.
Find Me
Read and
write
Click Execute to let red indicator flash, and find
device.
Device Max Throughput
(Kbps)
Read only
It is the maximum flow of device operation.
Device PJ Number
Read only
It is the device serial number.
HB Abnormal Monitor
Read only
It is used to monitor image stream condition. If the
size of compressed image is larger than that of raw
image under HB function, this parameter will
increase. When this parameter increases rapidly, it is
recommended to disable HB function.
HB Version
Read only
It refers to the version of High Bandwidth function.
11.2 Embedded Information in Image
The embedded information function and chunk data function may differ by camera models.
The camera supports adding and embedding the collection information to the image data. You can
set in the client software and define which information to be embedded in the image data.
Embedded information includes following categories: Timestamp, Gain, Exposure, Brightness Info,
White Balance, Frame Counter, Ext Triggering Count, Line Input Output, Width, Height, Offset X,
Offset Y, Pixel Format, and ROI Position. Each category of embedded information has its unique
data format.