HikRobot MV-CL021-40GM - Page 96

GigE Line Scan Camera·User Manual
87
Table 11-2 Embedded Information Data Format
No.
Information Type
Byte
Data Format Description
1
Timestamp
4 Bytes
4 bytes are used to transfer the timestamp information.
2
Gain
4 Bytes
4 bytes are used to transfer the gain information.
Each low 8 bits of the 4 valid data are combined to transfer
the gain information.
Value Range: 0 to 1023.
Note: High bits will be complemented with 0 automatically.
3
Exposure
4 Bytes
4 bytes are combined to show the exposure time, and the
unit is µs.
4
Brightness Info
4 Bytes
4 bytes are used to transfer the brightness information.
Value Range: 0 to 4095.
Note: High bits will be complemented with 0 automatically.
5
White Balance
8 Bytes
R/G/B occupies 2 bytes each.
Value Range: 0 to 4095.
6
Frame Counter
4 Bytes
Value Range: 0 to 2
32
-1.
7
Ext Trigger Count
4 Bytes
Value Range: 0 to 2
32
-1.
8
Line Input Output
4 Bytes
4 bytes are used to transfer the line input and output
information.
9
Width
4 Bytes
Value Range: 0 to 2
32
-1.
10
Height
4 Bytes
Value Range: 0 to 2
32
-1.
11
Offset X
4 Bytes
Value Range: 0 to 2
32
-1.
12
Offset Y
4 Bytes
Value Range: 0 to 2
32
-1.
13
Pixel Format
4 Bytes
Value Range: 0 to 2
32
-1.
14
ROI Position
8 Bytes
The column coordinate occupies 2 bytes, and the row
coordinate occupies 2 bytes. The column coordinate