HikRobot MV-CL021-40GM - Second Type of Pin Definitions

GigE Line Scan Camera·User Manual
5
No.
Signal
I/O Signal Source
Description
5
GND
Line 2-
Power supply ground
6
IO_IN1_P
Line 3+
Differential input IO 1+
7
IO_IN1_N
Line 3-
Differential input IO 1-
8
IO2
Line 2+
Bi-directional IO
9
IO_OUT0_P
Line 1+
Differential output IO 0+
10
IO_OUT0_N
Line 1-
Differential output IO 0-
11
IO_OUT1_P
Line 4+
Differential output IO 1+
12
IO_OUT1_N
Line 4-
Differential output IO 1-
3.1.2 Second Type of Pin Definitions
Refer to the pin definitions and labels attached to the power and I/O cable to wire the device.
Table 3-2 Pin Definitions (Second Type)
No.
Signal
I/O Signal Source
Description
1
GND
--
Power supply ground
2
DC_PWR
--
DC power supply positive
3
LINE0_P
Line 0+
Differential input/output IO 0+
4
LINE0_N
Line 0-
Differential input/output IO 0-
5
GND
--
Power supply ground
6
LINE3_P
Line 3+
Differential input/output IO 3+
7
LINE3_N
Line 3-
Differential input/output IO 3-
8
LINE4_P
Line 4+
Differential input/output IO 4+