HikRobot MV-CL021-40GM - Page 106

GigE Line Scan Camera·User Manual
97
Parameter
Read/Write
Description
GEV Stream Channel Selector
Read only
It selects the stream channel to control.
GEV SCP Interface Index
Read only
It is the Index of network interface to be used.
GEV SCP Host Port
Read and
write
It is the host port of the channel
GEV SCP Direction
Read only
It transmits or receives the channel.
GEV SCPS Fire Test Packet
Read only
It sends a test packet.
GEV SCPS Do Not Fragment
Read and
write
The state of this feature is copied into the “do not
fragment” bit of the IP header of each stream
packet.
GEV SCPS Big Endian
Read only
It is the Endianness of multi-byte pixel data for this
stream.
GEV SCPS Packet Size (B)
Read and
write
It specifies the stream packet size (in bytes) to send
on this channel.
GEV SCPD
Read and
write
It indicates the delay (in timestamp counter units) to
insert between each packet for this stream channel.
GEV SCDA
Read and
write
It indicates the destination IP address for this stream
channel.
GEV SCSP
Read only
It indicates the source UDP port address for this
stream channel.
Gev IEEE 1588
Read and
write
It enables the IEEE 1588 Precision Time Protocol to
control the timestamp register.
Gev GVSP Extended ID Mode
Read and
write
It enables the extended ID mode.