HikRobot MV-CL021-40GM - Page 108

GigE Line Scan Camera·User Manual
99
Current
Parameter
User
Parameter 1
User
Parameter 2
User
Parameter 3
Device
Default
Parameter
load
save
load
Figure 11-10 Parameter Relation
You can save parameters, load parameters and set user default as shown below.
Here we take selecting User Set 1 as an example.
 Save Parameters
Click User Set Control, select a user set in User Set Selector, and click Execute in User Set Save to
save parameters.
Figure 11-11 Save User Set
 Load Parameters
Click User Set Control, select a user set in User Set Selector, and click Execute in User Set Load to
load parameters to the camera, as shown below.
Figure 11-12 Load User Set