HikRobot MV-CL021-40GM - Page 104

GigE Line Scan Camera·User Manual
95
Parameter
Read/Write
Description
DEV PAUSE Frame Reception
Read and
write
It controls whether incoming pause frames are
handled on the given logical link.
GEV Current IP Address
Read only
It is the current IP address for the given network
interface.
GEV Current Subnet Mask
Read only
It is the current subnet mask of the given interface.
GEV Current Default Gateway
Read only
It is the default gateway IP address to be used on
the given network interface.
GEV First URL
Read only
It is the first choice of URL for the XML device
description file.
GEV Second URL
Read only
It is the second choice of URL to the XML device
description file.
GEV Number Of Interfaces
Read only
It indicates the number of physical network
interfaces supported by this device.
GEV Persistent IP Address
Read and
write
It indicates the persistent IP address for this network
interface. It is only used when the device boots with
the persistent IP configuration scheme.
GEV Persistent Subnet Mask
Read and
write
It indicates the persistent subnet mask associated
with the persistent IP address on this network
interface. It is only used when the device boots with
the persistent IP configuration scheme.
GEV Persistent Default
Gateway
Read and
write
It indicates the persistent default gateway for this
network interface. It is only used when the device
boots with the persistent IP configuration scheme.
GEV Link Speed
Read only
It indicates the speed of transmission negotiated by
the given network interface in Mbps.
GEV Message Channel Count
Read only
It indicates the number of message channels
supported by this device.
GEV Stream Channel Count
Read only
It indicates the number of stream channels
supported by this device.