HikRobot MV-CL021-40GM - Page 12

GigE Line Scan Camera·User Manual
3
Table 2-1 Component Description
No.
Name
Description
1
Lens Mount
It is used to install the lens.
2
Screw Hole
It is used to fix the camera to the installation position.
3
Screw Hole for GigE
Interface
It refers to the M2 screw hole for securing the network cable.
4
Gigabit Ethernet Interface
It refers to the Gigabit Ethernet interface for transmitting
data.
5
LED Indicator
It indicates the camera's status.
6
Power and I/O Interface
It provides power supply, input/output signal, serial port, etc.
Refer to the table below for the relation between camera model and camera appearance type.
Table 2-2 Camera Model and Appearance Type
Camera Model
Camera Appearance Type
MV-CL021-40GM
MV-CL022-40GC
MV-CL042-90GM/GC
Type I camera
MV-CL022-91GM/GC
MV-CL042-91GM/GC
Type II camera
MV-CL084-91GM
MV-CL086-91GC
Type III camera