HIKVISION AX DS-PWA32-HSR User Manual

Note
If enable DHCP, the device will gain the Wi-Fi parameters automacally.
5. Click Save.
Cellular Network
Set the cellular network parameters if you insert a SIM card inside the device. By using the cellular
network, the device can upload alarm
nocaons to the alarm center.
Before You Start
Insert a SIM card into the device SIM card slot.
Steps
1. Click
Communicaon Parameters → Cellular Data Network to enter the Cellular Data Network
Sengs page.
Figure 4-4 Cellular Data Network Sengs Page
2. Enable Wireless Dial.
3. Set the cellular data network parameters.
Access Number
Input the operator dialing number.
AX Security Control Panel
21

HIKVISION AX DS-PWA32-HSR Specifications

General

Brand	HIKVISION
Model	AX DS-PWA32-HSR
Category	Control Panel
Language	English