HIKVISION AX DS-PWA32-HSR

User Name
Ask the network carrier and input the user name.
Access Password
Ask the network carrier and input the password.
APN
Ask the network carrier to get the APN informaon and input the APN informaon.
Data Usage Limit
You can enable the
funcon and set the data threshold every month. If data usage is more
than the congured threshold, an alarm will be triggered and uploaded to the alarm center
and mobile client.
Data Used This Month
The used data will be accumulated and displayed in this text box.
4. Click Save.
Alarm Center
You can set the alarm center's parameters and all alarms will be sent to the congured alarm
center.
Steps
1. Click Communicaon Parameters → Alarm Receiving Center to enter the Alarm Receiving
Center page.
Figure 4-5 Alarm Receiving Center Parameters
2. Select the Alarm Receiver Center as 1 or 2 for conguraon , and slide the slider to enable the
selected alarm receiver center.
AX Security Control Panel
22