User Manual of Network Fisheye Camera
30
server.
(3) (Optional) You can click the Test button to test the time synchronization function
via NTP server.
Figure 5-3 Time Sync by NTP Server
Note: If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Synchronizing Time Manually
(1) Check the Manual Time Sync item to enable the manual time synchronization
function.
(2) Click the icon to open the calendar page.
(3) Click on the calendar to select the date, set the time, and click OK to save.
(4) (Optional) You can check Sync. with computer time item to synchronize the
time of the device with that of the local PC.
Figure 5-4 Time Sync Manually
3. Click Save to save the settings.
Note: For region using the summer time, DST settings are required to be configured.
Please refer to Section 9.9 DST Settings for detailed information.
To Next Page
Loading...
Need help?
General
