User Manual of Network Fisheye Camera
42
Name and password.
Choose Receiver: Select the receiver to which the email is sent. Up to 2 receivers
can be configured.
Receiver: The name of the user to be notified.
Receiver’s Address: The email address of user to be notified.
4. Click Save to save the settings.
5.3.10 Configuring NAT Settings
Purpose:
1. Enter the NAT settings interface.
Configuration >Advanced Configuration > Network > NAT
2. Choose the port mapping mode.
To port mapping with the default port numbers:
Choose Auto as the port mapping mode
To port mapping with the customized port numbers:
Choose Manual as the port mapping mode
And for manual port mapping, you can customize the value of the port number by
yourself.
Figure 5-18 Configure NAT Settings
3. Click Save to save the settings.
5.3.11 Configuring FTP Settings
Purpose:
To Next Page
Loading...
