User Manual of Network Fisheye Camera
56
Figure 5-35 Display Settings of Day/night Auto-switch
Image Adjustment
Brightness describes bright of the image, which ranges from 1~100, and the default
value is 50.
Contrast describes the contrast of the image, which ranges from 1~100, and the
default value is 50.
Hue adjusts color of the image.
Saturation describes the colorfulness of the image color, which ranges from 1~100,
and the default value is 50.
Sharpness describes the edge contrast of the image, which ranges from 1~100, and
the default value is 50.
Exposure Settings
If the camera is equipped with the fixed lens, only Manual is selectable, and the iris
mode is not configurable.
The exposure time refers to the electronic shutter time, which ranges from 1 ~
1/100,000s. Adjust it according to the actual luminance condition.
Day/Night Switch
Select the day/night switch mode, and configure the smart IR settings from this
option.
Day: the camera stays at day mode.
Night: the camera stays at night mode.
Auto: the camera switches between the day mode and the night mode according to the
illumination automatically. The sensitivity ranges from 0~7, the higher the value is,
the easier the mode switches. The filtering time refers to the interval time between the
day/night switch. You can set it from 5s to 120s.
Schedule: The camera switches between the day mode and the night mode according
to the configured time period.
Triggered by Alarm Input: The camera switches to the day mode or the night mode
after the alarm is triggered.
To Next Page
Loading...
Need help?
General
