User Manual of Network Fisheye Camera
49
5.3.13 Configuring HTTPS Settings
Purpose:
HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
E.g: If you set the port number as 443 and the IP address is 192.0.0.64, you may
access the device by inputting https://192.0.0.64:443 via the web browser.
Steps:
1. Enter the HTTPS settings interface.
Configuration > Advanced Configuration > Network > HTTPS
2. Create the self-signed certificate or authorized certificate.
Figure 5-28 HTTPS Settings
Create the self-signed certificate
(1) Click Create button to enter the creation interface.
To Next Page
Loading...
