User Manual of Network Fisheye Camera
51
5.4 Configuring Video and Audio Settings
5.4.1 Configuring Video Settings
Steps:
1. Enter the Video Settings interface:
Configuration >Basic Configuration > Video / Audio > Video
Or Configuration > Advanced Configuration > Video / Audio > Video
Figure 5-31 Configure Video Settings
2. Select the Stream Type of the camera to main stream (normal), sub-stream.
The main stream is usually for recording and live view with good bandwidth, and
the sub-stream can be used for live viewing when the bandwidth is limited.
3. You can customize the following parameters for the selected main stream or
sub-stream:
Video Type:
Select the stream type to video stream, or video & audio composite stream. The
audio signal will be recorded only when the Video Type is Video & Audio.
Resolution:
Select the resolution of the video output.
Bitrate Type:
Select the bitrate type to constant or variable.
To Next Page
Loading...
