User Manual of Network Fisheye Camera
52
Video Quality:
When bitrate type is selected as Variable, 6 levels of video quality are selectable.
Frame Rate:
Set the frame rate to 1/16~25 fps. The frame rate is to describe the frequency at
which the video stream is updated and it is measured by frames per second (fps).
A higher frame rate is advantageous when there is movement in the video stream,
as it maintains image quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the higher
video quality, but the higher bandwidth is required.
Video Encoding:
If the Stream Type is set to main stream, H.264 is selectable, and if the stream
type is set to sub stream, H.264 and MJPEG are selectable.
Note: The supported video encoding may differ according to the different
platform.
Profile:
Main Profile for H.264 coding is selectable.
I Frame Interval:
Set the I-Frame interval to 1~400.
SVC:
Scalable Video Coding is an extension of the H.264/AVC standard. Set it OFF or
ON according to your actual needs.
4. Click Save to save the settings.
5.4.2 Configuring Audio Settings
Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
To Next Page
Loading...
Need help?
General
