HIKVISION DS-2CD2942F-W User Manual

User Manual of Network Fisheye Camera
67
(Normally Open) and NC (Normally Closed). Edit the name to set a name for the
alarm input (optional).
Figure 5-46 Alarm Input Settings
3. Click Edit to set the arming schedule for the alarm input. For details, refer to Step
5 in Section 5.6.1.
4. Check the checkbox to select the linkage method taken for the alarm input. For
details, refer to Step 6 in Section 5.6.1.
5. (Optional) You can copy your settings to other alarm inputs.
6. Click Save to save the settings.
Note: Alarm input settings vary according to the camera model.
5.6.4 Configuring Alarm Output
Steps:
1. Enter the Alarm Output Settings interface:
Configuration>Advanced Configuration> Events > Alarm Output
2. Select one alarm output channel in the Alarm Output drop-down list.
3. (Optional) Input the alarm output name in the text field.
4. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or
Manual. The delay time refers to the time duration that the alarm output remains
in effect after alarm occurs.

HIKVISION DS-2CD2942F-W Specifications

General

Brand	HIKVISION
Model	DS-2CD2942F-W
Category	Security Camera
Language	English