User Manual of Network Fisheye Camera
88
Figure 9-7 IP Address Filter Interface
2. Check the checkbox of Enable IP Address Filter.
3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Input the IP Adreess.
Figure 9-8 Add an IP
(3) Click the OK to finish adding.
Modify an IP Address
Steps:
(1) Click the IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
To Next Page
Loading...
