DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
113
Figure 126 Add NetHDD Menu
3. Select the number and the type of network hard drive. Then enter in the IP address and the
directory of network hard drives.
4. If you do not know the directory of network hard drives, you can click Search after you enter the
IP address. The network hard drives in this subnet will be listed below. Select the one you want to
add.
5. Click OK to save the settings and return the pervious menu. The added hard drives will appear on
the list of HDDs.
6. You can edit or delete the network hard drivers on the HDD Information menu.
To Next Page
Loading...
