DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
71
Figure 69 Edit User Menu
2. Enter the old password in the Old Password textbox.
3. Check the Change Password checkbox.
4. Enter the new password in the Password textbox.
5. You can also enter the User’s MAC Address of the remote PC. If it is configured and enabled, it
only allows the remote user with this MAC address to access the device.
6. Click the OK button to save the setting and back to the up level.
Adding a New Remote/Local User
You may add up to 31 new users to your DVR.
To add new users:
1. On the User tab shown in Figure 68, click Add to enter Add User interface, as shown in Figure 70.
Figure 70 Add User Menu
2. Enter the information for new user, including User Name, Password, Level and User’s MAC
Address.
Level: Set the user level to Guest or Operator. Different user levels have different default
operating permission.
To Next Page
Loading...
Need help?
General