HIKVISION DS-9000 Series - Deleting a User; Editing a User

DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
73
 Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.
 Local Camera Management: Enabling and disabling analog camera(s). Adding, deleting and
editing of network camera(s).
 Local Advanced Operation: Operating HDD management upgrading system firmware,
clearing I/O alarm output.
 Local Shutdown/Reboot: Shutting down or rebooting the DVR.
Remote Configuration:
 Remote Log Search: Remotely viewing logs that are saved on the DVR.
 Remote Parameters Settings: Remotely configuring parameters, restoring factory default
parameters and importing/exporting configuration files.
 Remote Camera Management: Remotely enabling and disabling analog camera(s), and
adding, deleting and editing of network camera(s).
 Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
 Remote Video Output Control: Sending remote button control signal.
 Two-Way Audio: Realizing two-way radio between the remote client and the DVR.
 Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote
client) and controlling the alarm output.
 Remote Advanced Operation: Remotely operating HDD management upgrading system
firmware, clearing I/O alarm output.
 Remote Shutdown/Reboot: Remotely shutting down or rebooting the DVR.
Camera Configuration:
 Local Video Export: Locally exporting recorded files of the selected camera (s).
 Local Playback: Locally playing back recorded files of the selected camera (s).
 Local PTZ Control: Locally controlling PTZ movement of the selected camera (s).
 Local Manual Operation: Local manual operation of the selected camera (s).
 Remote Live View: Remotely viewing live video of the selected camera (s).
 Remote Playback: Remotely playing back recorded files of the selected camera (s).
 Remote PTZ Control: Remotely controlling PTZ movement of the selected camera (s).
 Remote Manual Operation: Remotely manual operation of the selected camera (s).
4. Click the Apply button to save the parameters.
Note:
If you forget the password to your DVR, contact your supplier with the serial number of your DVR to
obtain a secure code to reset your DVR.
Note:
User settings only appear on the list of System Configuration when login with Administrator accounts.
Deleting a User
To delete a user from the DVR:
1. Enter the User menu, shown in Figure 71 by going to Menu > System Configuration > User.
2. Select a user and click to delete.
3. Click the Yes button to confirm the deletion of user or click the No button to cancel.
Editing a User