DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
93
IP cameras List Import and Export
The added IP camera list can be imported and exported in the Camera menu.
To export IP camera list:
1. Enter the Cameras menu by going to Menu > Cameras Setup > Cameras. Select the IP Camera
Import/Export tab, as shown in Figure 97.
Figure 97 IP Camera Import/Export Management Menu
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. You can click the New Folder button to create a new folder.
5. Select the location where you would like the configuration to be stored on the USB storage
device.
6. Click Export to export an IP camera list file to USB storage device.
7. Click to exit out of the Import / Export menu.
To import IP camera list:
1. Enter the Cameras menu, shown in Figure 97 by going to Menu > Cameras Setup > Cameras.
Select the IP Camera Import/Export tab, as shown in Figure 97.
2. Connect the USB storage device to a USB port on the DVR.
3. Click the Refresh button. The contents of the USB storage device will be shown on the screen.
4. Select the list file.
5. Click the Import button.
6. In the pop-up window click Yes to confirm the import and the system will automatically reboot to
make it effective
7. Click to exit out of the Import/Export menu.
To Next Page
Loading...
Need help?
General