DS-7700NI-SP/9000/9600 Series HDVR/NVR User’s Manual
90
Figure 92 IP Camera Management Menu
The added cameras will display in a list. You can also configure the added camera. To configure added
camera:
1. Click in the added camera list to pop up an Edit IP Camera menu, as shown in Figure 93.
Figure 93 Edit IP Camera
2. You can edit the IP Camera Address, Protocol, Configuration Port and Video Port.
3. Click the Apply button to save the settings. Click OK to exit this menu. Click Cancel without
click Apply or OK will back without saving.
4. For editing more parameters, click the Advance Set button to pop up an Advance Settings
window, as shown in Figure 94.
To Next Page
Loading...
Need help?
General