Access Control Terminal·User Manual
106
Normal Card: By default, the card is set as normal card.
Card for Disabled Person: The door will remain open for the configured
time period for the cardholder.
Card in Blacklist: The card swiping action will be uploaded and the door
cannot be opened.
Patrol Card: The card swiping action can used for checking the working
status of the inspection staff. The access permission of the inspection staff
is configurable.
Duress Card: The card swiping action will be uploaded.
Super Card: The card is valid for all the doors of the controller during the
configured schedule.
Visitor Card: The card is assigned for visitors.
2. Click Add and select the available card.
3. Click OK to confirm assigning the card(s) to the selected card type.
4. Click the Apply button to take effect of the new settings.
You can click Delete to remove the card from the card type and the
card can be available for being re-assigned.
Card Reader Authentication
Purpose:
You can only open the door by both swiping card and entering the password
during the set time periods.
To Next Page
Loading...
