Access Control Terminal·User Manual
113
7.4 Checking Status and Event
Purpose:
In this section, you are able to anti-control the status of the door and to check
the event report of the control point.
7.4.1 Status Monitor
Purpose:
You can anti-control the door status and check the real-time access event
information for the control point.
Click the icon on the control panel to enter the
interface.
Access Anti-control
Door Anti-control
Purpose:
You can control the status for a single control point (a door) in this section.
Steps:
1. Enter the status monitor page.
To Next Page
Loading...
Need help?
General
