Access Control Terminal·User Manual
32
3. Set the template No., with entering the template No. by the numeric keys.
Max. 64 templates can be configured, and the template No. range is from 1
to 64.
4. Enter the Weekly Plan No. by the numeric keys.
5. Set the Holiday groups. Move the cursor to holiday group No.(the default is
000), and Enter the holiday group No. configured in Holiday Group
Settings by the numeric keys.
The holiday group No. is separated by a comma.
6. Click the * key to return to the Access Opt interface.
6.6 System Information
Steps:
1. Move the cursor to Sys Info (system information) by using direction keys.
2. Click the # key to enter the system information interface.
Figure 6-33 System Information Interface
3. Select User Count or Device Information.
User Capacity
Figure 6-34 User Count Interface
Registered Amount: the count of user that is registered
Remainder Amount: the count of remainder registration amount
Total Amount: It refers to the maximum amount of cards
To Next Page
Loading...
Need help?
General
