Access Control Terminal·User Manual
71
The door status of open, close, normally open, and normally close cannot
be triggered at the same time.
Models DS-K1T802M and DS-K1T802E do not support the snapshot
function.
7.3.6 Access Permission Configuration
Click the icon on the control panel to enter the
interface.
Access Permission Settings
Purpose:
You can allocate permission for people/department to enter/exist the control
points (doors) in this section.
Steps:
1. Enter the Permission page.
2. Click on icon on the upper-left side of the page to enter
the Add Permission page.
To Next Page
Loading...
Need help?
General
