HIKVISION DS-K1T802 - Client Software Operations

Access Control Terminal·User Manual
26
Default Settings: After restoring defaults settings, parameters, excluding
network parameters and event parameters, are returned to the factory
defaults.
4. Click the # key to implement the settings.
6.3.2 Setting login Password
Steps:
1. Click the # key to enter the password settings interface.
Figure 6-22 Password Changing Interface
1) Enter the old password.
2) Enter a new password.
3) Confirm the new password.
The valid password length should be 5 characters.
2. Click the # key to confirm the settings.
6.3.3 Door Settings
Purpose:
On the door settings interface, you can set door parameters, including Open
Time (Door Action Time), Open Time-out (Delayed Door Alarm), Door Magnetic
(Door Magnetic Status Settings), Button Type (Exit Button Status Settings), and
First Card settings.
Steps:
1. Move the cursor to Door Param (door settings) by using direction keys in
the system settings interface.
2. Click the # key to enter the door settings interface.